Chapter 6. Crypto-Isakmp Instance; Crypto Isakmp Config Commands - Motorola RFS6000 Reference Manual

The (config-crypto-isakmp) instance is used to configure ISAKMP policies.
To enter this instance, use this command:
RFSwitch(config)#crypto isakmp policy <1-10000>
RFSwitch(config-crypto-isakmp)#

6.1 Crypto ISAKMP Config Commands

Table 6.1 summarizes
Command
authentication
clrscr
encryption
end
exit
group
hash
help
Crypto-isakmp Instance
commands
crypto-isakmp
Table 6.1 Crypto ISAKMP Command Summary
Description
Sets the authentication scheme
Clears the display screen
Sets the encryption algorithm
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Sets the Diffie-Hellman group
Sets the hash algorithm
Provides a description of the interactive help system
Ref.
page 6-3
page 6-4
page 6-5
page 6-6
page 6-7
page 6-8
page 6-9
page 6-10