How To Use This Guide - Motorola RFS6000 Reference Manual

viii Motorola RF Switch CLI Reference Guide
The syntax, parameters and descriptions within this guide can also be used generically for
a RFS6000 and RFS7000 model switch. However, some subtle differences do exist
amongst these baselines. These differences are strongly noted within the specific
commands impacted. When these differences are noted, the options available to each
switch baseline are described in detail.

How to Use this Guide

This guide will help you implement, configure, and administer the switch and associated
network elements. This guide is organized into the following sections:
Chapter
Chapter 1, "Introduction"
Chapter 2, "Common
Commands"
Chapter 3, "User Exec
Commands"
Chapter 4, "Privileged Exec
Commands"
Chapter 5, "Global
Configuration Commands"
Chapter 6, "Crypto-isakmp
Instance"
Chapter 7, "Crypto-group
Instance"
Chapter 8, "Crypto-peer
Instance"
Chapter 9, "Crypto-ipsec
Instance"
Jump to this section if you want to...
Review the overall feature-set of the switch, as well as
the many configuration options available.
Understand the commands common amongst many
contexts and instance contexts within the switch CLI.
Summarize the User Exec commands within the
switch CLI.
Review the Priv Exec commands within the switch CLI.
Understand the Global Config commands within the
switch CLI.
Review the (
crypto-isakmp)
switch CLI.
Understand the (
crypto-group)
switch CLI.
Summarize the (
crypto-peer)
switch CLI.
Review the (
crypto-ipsec)
switch CLI.
commands within the
commands within the
commands within the
commands within the