Chapter 25. Smart Rf Instance; Smart-Rf Config Commands - Motorola RFS6000 Reference Manual

Use the
(config-wireless-smart-rf)
configuration commands. To navigate to the
use the following commands:
RFSwitch(config)#wireless
RFSwitch(config-wireless)#smart-rf
RFSwitch(config-wireless-smart-rf)#

25.1 smart-rf Config Commands

The following table summarizes
Command
assignable-
power-range
auto-assign
clrscr
end
exit
extensive-
scan
config-wireless-smart-rf
Description
Specifies the power range during power-assignment
Enables individual RF parameters to be auto-assigned
Clears the display screen
Ends the current mode and moves to the PRIV EXEC
mode
Ends the current mode and moves to the previous mode
Enables the extensive-scan mode, calibrations to be
made at every tx-power level
Smart RF Instance
instance to configure Smart RF related
config-wireless-smart-rf
commands:
instance,
Ref.
page 25-3
page 25-4
page 25-5
page 25-6
page 25-7
page 25-8