Motorola RFS6000 Reference Manual page 316

5-48 Motorola RF Switch CLI Reference Guide
ip nat inside destination static <IP> <port>
[tcp|udp] <outside-global-IP> {<outside-port>}
ip nat inside destination static <IP> {<outside-global-IP>
<outside-port>}
ip nat inside source list <acl-name> interface [<interface-
name>|vlan <1-4094>] overload
ip nat inside source static <local-IP> <outside-global-IP>
ip nat outside destination static <IP> <outside-port>
[tcp|udp] {<inside-global-IP> {<inside-port>}}
ip nat outside destination static <IP> {<outside-global-IP>
<outside-port>}
ip nat outside source list <acl-name> interface [<interface-
name>|vlan <1-4094>] overload
ip nat inside source static <local-IP> <outside-global-IP>
ip route [<IP-destination-prefix> <IP-destination-prefix-
mask>|<IP-destination-prefix/Mask>] <gateway-IP>
ip ssh {[port <port>|rsa keypair-name <key-pair-name>]}
ip telnet {port <port>}
Parameters
ip access-list extended
[<100-199|<2000-
2699>|<acl-name>]
ip access-list standard
[<1-99>|<1300-
1999>|<acl-name>]
default-gateway <IP>
Using the access list parameter options to enter the
context and the
ext-nacl
changes to the context entered.
• For more information on extended ACL, see
Chapter 14, Extended ACL Instance
• For more information on standard ACL, see
Chapter 15, Standard ACL Instance
Configures the IP address of the default gateway
• <IP> – IP address of the next-hop router
context. The prompt
std-nacl