25-10
Motorola RF Switch CLI Reference Guide
25.1.8 hold-time
Smart RF Instance
Defines the number of seconds to disable interference avoidance after a detection
This prevents a radio from changing channels continuously.
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
hold-time <30-65535>
Parameters
hold-time <30-65535>
Example
RFSwitch(config-wireless-smart-rf)#hold-time 400
RFSwitch(config-wireless-smart-rf)#
The number of seconds to disable interface avoidance after
a detection. This prevents the radio from changing channels
continuously. Set the values in seconds from 30-65535.