Creating Network Pool - Motorola RFS6000 Reference Manual

17.2.1 Creating network pool

To create a network pool:
1. Create a DHCP server dynamic address pool.
RFSwitch(config)#ip dhcp pool test
2. Map the DHCP pool to the network pool.
RFSwitch(config-dhcp)#network 192.168.0.0/24
3. Add the address range for the dynamic pool.
RFSwitch(config-dhcp)#address range 192.168.0.30 192.168.0.60
4. Assign a domain name (as appropriate) to this dynamic pool.
RFSwitch(config-dhcp)#domain-name test.com
5. Configure the DNS server's IP address.
RFSwitch(config-dhcp)#dns-server 192.168.0.10 192.168.0.11
6. Configure the DHCP client's IP address lease period.
RFSwitch(config-dhcp)#lease 10
7. Exit from the DHCP instance upon creation of the network pool.
RFSwitch(config-dhcp)#exit
8. Start the DHCP server to initiate the network pool.
RFSwitch(config)#service dhcp
DHCP Server Instance 17-37