Transposing Mistyped Characters; Controlling Capitalization - Motorola RFS6000 Reference Manual

1-12 Motorola RF Switch CLI Reference Guide

1.4.6 Transposing Mistyped Characters

If you have mistyped a command entry, you can transpose the mistyped characters. To
transpose characters, use the following key combination:
Keystrokes
Ctrl-T

1.4.7 Controlling Capitalization

Capitalize or lowercase words with a few simple key sequences. The switch CLI
commands are generally case-insensitive (and in lowercase). To change the capitalization
of the commands, use one of the following sequences:
Keystrokes
Esc, C
Esc, L
Purpose
Transposes the character to the left of the cursor with the character
located at the cursor
Purpose
Capitalizes the letters to the right of cursor
Changes the letters at the right of cursor to lowercase