Show - Motorola RFS6000 Reference Manual

7.1.7 show


Crypto Group Config Commands
Displays current system information running on the switch
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <paramater>
Parameters
?
Example
RFSwitch(config-crypto-group)#show ?
access-list
aclstats
alarm-log
system
autoinstall
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 :
• port-channel
• static-channel-group
NOTE: For more details on the show command see
Displays all the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the
autoinstall configuration
Crypto-group Instance 7-9
show on page 2-37