Motorola RFS6000 Reference Manual page 796

20-76 Motorola RF Switch CLI Reference Guide
wmm [background|
best-effort|video|voice]
[aifsn<1-15>|burst
<0-65535>| cw<0-15>]
wmm [video|voice]
acm [enable|max-mus
<1-64>]
Example
RFSwitch(config-wireless)#radio 250 bss auto 3-5
RFSwitch(config-wireless)#
Sets 802.11e/Wireless Multi Media (WMM) parameters
(supported only on AP300).
• background – Prioritizes Background category traffic
• best-effort– Prioritizes Best Effort category traffic
• video – Prioritizes Video category traffic
• voice – Prioritizes Voice category traffic
• acm [enable|max-mus <1-64>] – Admission control
parameters. Use
enable
control.Enabling ACM on video enables ACM on the
Voice access category. Use
number of mobile units that are allowed access on the
specified categories
• aifsn <1-15> – Arbitration Inter Frame Spacing Number
(AIFSN) defines the wait time (in milliSeconds) between
data frames. Derived using AIFSN and the slot-time
• burst <0-65535> – Transmit-opportunity. Sets an interval
when a particular WMM STA has the right to initiate
transmissions onto the wireless medium
• cw <0-15> – Contention Window (cw) parameters.
Wireless stations pick a number between 0 and the
minimum contention window to wait before re-trying
transmissions. Stations then double their wait time on a
collision, until it reaches the maximum contention
window
to allow admission
to specify the
max-mus