Use the (config-dhcpclass) instance to configure DHCP user classes. The switch supports
a maximum of 8 user classes per DHCP class. To navigate to this instance use the
command:
RFSwitch(config)#ip dhcp class <class-name>
RFSwitch(config-dhcpclass)#
Refer to
ip on page 12-11
configurations.
18.1 DHCP Server Class Config Commands
Table 18.1
summarizes
Command
clrscr
end
exit
help
multiple-user-
class
DHCP Class Instance
and
DHCP Class Instance on page 18-1
commands:
config-std-nacl
Table 18.1 DHCP Server Class Config Commands
Description
Clears the display screen
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous
mode
Displays the interactive help system in HTML format
Enables multiple user class options
for other DHCP related
Ref.
page 18-3
page 18-4
page 18-5
page 18-6
page 18-7