Client - Motorola RFS6000 Reference Manual

20.1.15 client


Wireless Configuration Commands
Use this command to configure a wireless client
This command creates an exclude-list or include list. Creating a list moves the user to a
new mode
Refer section
(config-wireless-client-list)
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
client [exclude-list|include-list] <list-name>
Parameters
exclude-list <list-name>
include-list <list-name>
<list-name>
Example
RFSwitch(config-wireless)#client exclude-list JustMe
RFSwitch(config-wireless-client-list)#
config-wireless-client-list
config-wireless-client-list Commands on page 20-29
Sets the wireless client exclude list configuration. A MU
NAC check is conducted, except for those in the exclude
list. Devices in the exclude list will not have a NAC check
performed.
Defines the wireless client include list configuration. No
MU NAC check is conducted, except for those in the include
list. Devices in the include-list will have NAC checks.
Name of the list to be created.
.
command summary.
Wireless Instance 20-27
for