Creating A Dhcp User Class; Option - Motorola RFS6000 Reference Manual

18.1.7 option


DHCP Server Class Config Commands
Specifies a value for DHCP user class options
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
option user-class <class-name>
Parameters
user-class <class-name>
Example
RFSwitch(config-dhcpclass)#option user-class MC800
RFSwitch(config-dhcpclass)#

18.1.7.1 Creating a DHCP User Class

Complete the steps below to create a DHCP user class:
1. Create a DHCP class named
32 DHCP classes.
RFSwitch(config)#ip dhcp class RFS7000DHCPclass
RFSwitch(config-dhcpclass)#
2. Create a USER class named
dhcpclass)
RFSwitch(config-dhcpclass)#option user-class MC800
RFSwitch(config-dhcpclass)#
3. Create a Pool named
RFSwitch(config)#ip dhcp pool WID
RFSwitch(config-dhcp)#
Creates/modifies DHCP server user class options
• <class-name> – ASCII value of user-class option
RFS7000DHCPclass
MC800
. The switch supports a maximum of 8 user classes per DHCP class.
, using the
WID
. The switch supports a maximum of
. The privilege mode changes to
mode.
(config)#
DHCP Class Instance 18-9
(config-