Mac-Auth-Local - Motorola RFS6000 Reference Manual

20.1.30 mac-auth-local


Wireless Configuration Commands
Configures the local MAC authentication list
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
mac-auth-local <1-1000> [allow|deny|rate-limit]
mac-auth-local <1-1000> [allow|deny] <starting-MAC>
<ending-MAC> [<list>|not-mapped] {<radio-desc>|
zone [<1-48>|default|unknown]}
mac-auth-local <1-1000> rate-limit
[wired-to-wireless|wireless-to-wired] <100-1000000>
Parameters
<1-1000>
allow
deny
rate-limit
<starting-MAC>
<ending-MAC>
<list>
not-mapped
Sets the mac-auth-local entry index to a value between 1
and 1000.
Allows mobile units that match this rule to associate.
Denies association to mobile units that match this rule.
Sets the rate limit value for this ACL entry.
Starting MAC address in AA-BB-CC-DD-EE-FF or
AA:BB:CC:DD:EE:FF format.
Ending MAC address in AA-BB-CC-DD-EE-FF or
AA:BB:CC:DD:EE:FF format.
Configures the local MAC authentication list.Sets the list
(1,3,7) or range (3-7) of WLAN indices.
An unmapped row in the ACL.
Wireless Instance 20-49