Schedule-Calibrate - Motorola RFS6000 Reference Manual

25-28 Motorola RF Switch CLI Reference Guide

25.1.16 schedule-calibrate


Smart RF Instance
Configures the calibrate schedule parameters
This is used to configure parameters that schedule the automatic configuration of the
Smart RF feature.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
schedule-calibrate [enable |interval |start-time]
schedule-calibrate interval <1-366>
schedule-calibrate start-time <HH:MM> <1-31> <1-12>
<2008-2035>
Parameters
enable
interval <1-366>
start-time <HH:MM>
<1-31> <1-12>
<2008-2035>
Example
RFSwitch(config-wireless-smart-rf)#schedule-calibrate enable
RFSwitch(config-wireless-smart-rf)#schedule-calibrate
interval 2
RFSwitch(config-wireless-smart-rf)#schedule-calibrate
RFSwitch(config-wireless-smart-rf)#
Enables the schedule-calibrate feature. When enabled, the
Smart RF auto calibration feature is performed at the set
interval.
Sets the interval in days between each auto calibration
Sets the time and day to start the first auto-calibration.
<HH:MM> is in 24 hours format.
start-time 10:30 1 1