Broadcast-Tx-Speed - Motorola RFS6000 Reference Manual

20-26 Motorola RF Switch CLI Reference Guide

20.1.14 broadcast-tx-speed


Wireless Configuration Commands
Configure the rate at which broadcast and multicast traffic is transmitted between the
switch and mobile unit
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
broadcast-tx-speed [range|throughput]
Parameters
range
throughput
Example
RFSwitch(config-wireless)#broadcast-tx-speed range
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#broadcast-tx-speed throughput
RFSwitch(config-wireless)#
Uses a lowest basic rate, but provides the maximum range
(default)
Uses a highest basic rate, but provides the maximum
throughput