Motorola RFS6000 Reference Manual page 393

clamp [path-mtu|
tcp-mss]
dhcp-snoop-conflict-
detection disable
dhcp-snoop-conflict-
logging disable
flow timeout
[icmp|other|tcp|udp]
Configures wireless firewall
• clamp [path-mtu|tcp-mss] – Displays clamp value
• path-mtu – Displays limit discovered path-mtu
• tcp-mss – Displays limit TCP to inner path-mtu
Displays IP Address, MAC Address conflict detection
based on dip-snoop-table
• disable – Disables packet drop based on conflict
detection
Displays IP Address, MAC Address conflict logging based
on dip-snoop-table
• disable – Disables logging based on conflict detection
Configures firewall flow of packets.
• timeout [icmp|other|udp] <1-32400> – Sets the timeout
value for type ICMP, UDP, and Other to a value between
1 and 32400 seconds
• timeout tcp [close-wait|established|reset|setup]
<10-32400> – Sets the timeout value for TCP packet
types to a value between 1 and 32400 seconds
• close-wait – Configures the Closed TCP Flow timeout
value
• established – Configures the Established TCP Flow
timeout value
• reset – Configures the Reset TCP Flow timeout value
• setup – Configures the Opening TCP Flow timeout
value
Global Configuration Commands 5-125