Motorola RFS6000 Reference Manual page 314

5-46 Motorola RF Switch CLI Reference Guide
5.1.15 ip

Global Configuration Commands
Configures a selected Internet Protocol (IP) component
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ip [access-list|default-gateway|dhcp|domain-lookup|
domain-name|dos|http|http-https|igmp|local|name-
server|nat|route|
routing|ssh|telnet]
ip [domain-lookup|routing]
ip access-list [standard|extended]
ip access-list extended [<100-199|<2000-2699>|<acl-name>]
ip access-list standard [<1-99>|<1300-1999>|<acl-name>]
ip default-gateway <IP>
ip dhcp [bootp|class|excluded-address|option|ping|pool]
ip dhcp bootp ignore
ip dhcp class <class-name>
NOTE: Using
access-list extended
(config-ext-nacl)
Chapter 14, Extended ACL
Using
access-list standard
instance. For more information, see
nacl)
Chapter 15, Standard ACL
Using
ip dhcp pool <pool-name>
instance. For additional information, see
(config-dhcp)
Chapter 17, DHCP Server
Using
ip dhcp class <class-name>
(config-dhcpclass)
Chapter 18, DHCP Class
moves you to the
instance. For more information, see
Instance.
moves you to the
Instance.
command to move to the
Instance.
moves you to the
instance. For additional information, see
Instance.
(config-std-