21.1.1 aeroscout
RTLS Config Commands
Configure support for Aeroscout RTLS engine.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
aeroscout [enable|multicast-listen-addr<MAC-Address>]
Parameters
enable
multicast-listen-addr
<MAC-Address>
Usage Guidelines
Use
[no] aeroscout (enable)
not affect on-board locationing.
Example
RFSwitch(config-rtls)#aeroscout enable
RFSwitch(config-rtls)#
Enables and configures external Aeroscout RTLS engine
Configures multicast MAC address to which Aeroscout tags
packets are destined
• <MAC-Address> – Multicast MAC address. AeroScout's
default multicast MAC address is '01:0C:CC:00:00:00'
to disable support for Aeroscout RTLS engine. This does
RTLS Instance
21-3