Caution With Electrical Parts; Battery Cable; Removal Of Connector; Locking Of Connector - Mazda 121 Workshop Manual

CAUTION
GI
9MUGIX-022
9MUGIX.O23
9MUGIX.O24
9MUGIX-025
03uGtx,011
CAUTION WITH ELECTRICAL PARTS
Battery Cable
Before disconnecting connectors or replacing electrical parts,
disconnect the negative battery cable.
connectors
Removal of connector
Never pull on the wiring
nectors.
harness when disconnecting con-
Connectors can be removed by pressing or pulling the lock
lever as shown.
Locking of connector
When locking connectors, make sure to listen for a click that
will indicate they are securely locked.
lnspection
1 . When a tester is used to check for continuity or to measure
voltage, insert the tester probe from the wire harness side.
Gr-l3