Cap And Rotor Inspection; Igniter Inspection; Igniter Replacement; High-Tension Lead Inspection - Mazda 121 Workshop Manual

IGNITION SYSTEM
Inspectlon
Cap and rotor
1. Check for corrosion, damage, and cracks.
2. Replace il necessary.
01E0GX.055
IGNITER
lmpqction
1. Check the ECU. (Refer to page F-| 12.)
2. Check the condition of the connector, distributor cap, ro-
tor, ignition coil, and high-tension leads.
3. ll all are normal but misfire still occurs, replace the igniter.
01a0GX.021
Feplacemert
1. Replace the distributor. (Refer to page G-21.)
2. Adjust the ignition timing. (Refer to page G-18.)
OlAOGX€2
HIGH-TENSION LEAO
Insp€ciion
1. Measure resislance of high'tension lead.
Spscification: 16 m per I n (3.28 ff)
2. lf not as specified, replace the high-tension lead set.
G-23