Drive Pinion - Mazda 121 Workshop Manual

STARTING SYSTEM
Disaasembly Note
Drlvs plnlon
Remove the stopper for the overrunning clutch with a pipe
as snown.
Assembly Note
Drive pinlon
1. Set the drive pinion onto the armature and install the ring.
2. Install the stopper with the SST and press it, as shown.
Inspoctlon
agnetic awilch
1. Use an ohmmeter to check continuity between the S and
M terminals. Replace the magnetic switch if there is no con-
tinuity.
2. Use an ohmmeter to check continuity between the S termi-
nal and the body. Replace the magnetic switch if there is
no continuity.
3. Use an ohmmeter to check continuity between the M and
B termanals. Replace the magnetic switch il there is con-
tinuity.
G-29