Fan Motor Inspection; Fan Motor Replacement - Mazda 121 Workshop Manual

E
FAN IIOTOR
1. Cooling fan connector
2. Fiadiator cowling
E-12
FAN MOTOR
INSPECTION
1. Check that the battery is fully charged.
2. Disconnect the fan motor connector.
3. Connectthe battery and an ammeter to the lan motor con-
neqor.
4. Verify that current is as specilied.
Current (A)
5. ll current is not within speciiication and/orthetan does not
turn smoothly, replace the lan motor'
REPLACEMENT
Cautlon
; Posiiion the hose clamp in the orlginal location on the hose, and squeeze the clamp llghtly
with large pliera to ensu.e a good llt.
1. Disconnecl the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the figure.
4. lnstall in the reverse order of removal.
7,3-ll
x{
(30-110 d*q,
30-95 lDlD)
0,01-o.oit f (0.ra--a.22 ciFtg, 015-o 1l lFlb)
0.oa'0,06 Nfl (0JHr,56
crF*!,0.3!H.5o
lFlb)
3. Cooling fan
4. Fan motor
It4TX
ATX
B3
6 . 6 + 1