Mazda 121 Workshop Manual page 81

DISASSEMBLY
@
Dbaaaembly Note
Flywheel
Cautlon
. Add approx l3mm (0.51 In) ot spacets (@) lo space
the SST away trom lhe cylinder block. (MTX)
1. Hold the flywheel with the SST.
2. Loosen the clutch cover bolts in two or three steps in the
order shown in the figure.
3. Remove the clutch cove..
4. Remove the flywheel bolts.
5. Bemove the flywheel.
6. Remove the SST.
Backing plate, drive plate, and adapter (ATX)
'1. Hold the drive plate with the SST.
2. Remove the drive plate botts.
3. Remove the backing plate, drive plate, and adapter.
4. Remove the SST.
Oll pan
'1. Remove the oil pan mounting bolts.
2. lnsen a screwdriver or a suitable tool between the IVIBSP
and oil pan, and Pry them apart.
Caution
. Do not insert the prying tool between the MBSP and
cylinder block.
. Do not damage or sc6tch the contact surfaces.
B-43