Mazda 121 Workshop Manual page 386

J
OIFFERENTIAL
Assembly
1. Installthe speedometer drive gear as shown in the ligure
Cautlon
. Wtlen replacing a bearing, replace lhe inner and out-
er races as a set.
2. Install the new beanng lnner race.
(1) Installthe new bearing inner race (speedometer drive
gear sjde) with a Press and the SST
(2) Install the new bearing inner race (ring gear side) with
a press and the SST.
3. Set the pinion gears and thrust washer into the gear case
4. Insert the pinion shaft.
J-62