Inspection Of Dashpot - Mazda 121 Workshop Manual

SCHEDULED I'AINTENANCE SERVICES
INSPECTION OF DASHPOT
Inapection
1. ODen the throttle valve lully. Push the dashpot rod with a
finger and verity that it goes into the dashpot slowly.
2. Release the rod and check that it comes out quickly
3. Replace the dashpot if not as specified.
4. Warm up the engine and run it at idle.
5. Connect a tachometer to the diagnosis connector lG-
terminal and increase engine speed.
6. Slowly decrease the engine speed and check that the le-
ver touches the dashpot rod at the specified speed.
Specitication: 2,500 + 100 rpm
7. if not as specilied, loosen the locknut and turn the dashpot
to adjust.
ADJUSTING SCFEW
A - 1 4