Mazda 121 Workshop Manual page 369

TRANSAXLE
J
Assembly Noie
Adiustmer shlm and bearing outer racc (dltferential)
1. Set the adjustment shim and new bearing outer race into
the lransaxle case.
2. After mountingthe clutch housing onto lhe transaxle hang-
er, tap in the diffe.ential bearing outer races with a ham-
mer until it is llush with the end of the transaxle case.
Pipe diametsr: 59mm (2,32 ln)
Oll seal (ditterential)
Caution
. Apply transaxle oil to the outet circumfercnce ol the
oil seal,
lnstall the new oil seal with the SST.
Adiustment shim, bearlng ouier race (secondary shaft)
1. Installthe adjustment shim and bearing outer race into the
clutch housing.
2. After mounting the clutch housing onto the transaxle hang-
er, tap in the difterential bearing outer races with a ham-
mer until it is flush with the end ol the clutch housinq.
Plpe dlametel: 47mm (1.85 in)
\
J-45