Mazda 121 Workshop Manual page 365

TRANSAXLE
J
Dltterenllal
'1. Remove the bearing outer races trom the transaxle case
and remove the adjustment shims.
Note
. Turn A and B untilthe gap (anow) in lhe tigu.e is
eliminated,
2. Install the differential side bearing outer race to the SST
(selector).
3. Set the bearing outer race and diiferential assembly into the
clutch housino.
4. Set the bearing outer race and SST onto the differential as-
sembly as shown in the fagure.
5. Slide the transaxle case over the ditferential assemblv
J-41