Mazda 121 Workshop Manual page 376

J
TRANSAXLE
Assembly Note
Primary ahalt gear assembly and secondary shatt gear
assembly
Inslall the bdmary shatt gear assembly and the secondary shaft
gear assembly together.
Reverse shift lever, reverse lever shalt
1. Apply transaxle oil to the new O-ring and then inslall the
reverse lever shalt.
2. Installthe reverse shift lever and then installthe reverse le-
ver shaft.
3. Inslall the new pin.
Reverse idler gaar
Install the reverse idler gear and the reverse idler shalt.
Shift rod (l sU2nd), shift fork (l su2nd), roll pin, interlock
pin
Caution
. The mark 0ndicated by the atrow in the llgure) and
theshin rod end mountlng bolt hole must be in the
aame direction.
'l. ,nstall the shitt iork and the shift rod.
Caution
. When Installing the roll pin, be caretul not to dam'
age the shlft rod.
2. Install the new roll pin.
3. Install the interlock pin.
J-52