Engine Mounting Member - Mazda 121 Workshop Manual

J
TRANSAXLE
- 1 .
Removd Note
DrlvEhaft
1. Remove the ball joint clinch bolt.
Caution
. Wrap a rag around the ball ioint dusi boot to pro'
lect h trom damage.
2. Pry the lower arm from the knuckle with a pry bar.
Cautlon
. Do not shock the tripod ioint when removing the
dtiveshaft.
3. Seoarate the driveshaft from the transaxle by prying wilh
a bar inserted between lhe outer nng and the transaxle.
4. Suspend the driveshaft with a rope.
Engine mountinE member
1 . Suspend the engine with the SST
2. Remove the bolts and nuts shown, and remove the englne
mounting member.
J-12