Mazda 121 Workshop Manual page 360

J
TRANSAXLE
---
t-
Asssmbly tlote
Bearing (lst)
Install the bearing wth a Press
il!,1
\
OIL GFOOVE
Clutch hub assembly (3rd/4th)
i. Fress the clutch hu6 assembly onto the primary shaft
Caution
. lliqn the svnchronlzer ring groove and clutch hub
assiembly lieys (3rd,/4th) when Installing'
2. Align he clutch huband shalt gear spline and then installing'
*re@69
Synchronizer ring, 4th gear
1. Install the synchronEer nng
(3rd/4th).
2. Install the 4th gear.
and clutch hub assembly
5th gear
Caution
. ltion tne svnctrronizel ring groove and clutch hub
ass;embly *eys (3rd/4th) whsn installlng'
'1. Align the clutch hub and primary shaft splines'
2. Press the sth gear on
J-36