Clutch Disc - Mazda 121 Workshop Manual

CLUTCH UNIT
lnstallation Note
Flvwheel
1 - hemove the sealant lrom the ilwheel boh holes in the crank'
shatt and from the flYwheel bolts
Caution
. ll all the previous sealant cannot be removed flom
a bolt, replace the bolt.
. Do not apply sealant lf a new bolt is used.
2. Set the flywheel onto the crankshatt
3. Apply sealant to the tlywheel bolts and install them
4. Hold the tlvwheel with the SST.
5 Tiohten the bolts in two or three steps in the order shown
ti"otrt.nino to*r",
-gHos'l*tn
ig.a-to.s m'kg' 7l-?6 ftJb)
Pllot bearing
Note
. Insiall the pilol beafng flush with the tlywheel.
Instail the new bearing with a plastic hammer.
3. Set the clotch disc onto the flywheel wiih the SST.
Clutch disc
'1. Clean the clutch disc splines and main drive gear splines
2- Lightly grease the splines with molybdenum grease.
@E@
01EoHX{]7
H - l 0