Driveshaft; Engine Mount Member - Mazda 121 Workshop Manual

REMOVAL
2. Pull the lower arm downward to separate them from the
knuckles.
Caution
. Do not damage the ball-ioint dusl boots.
Driveehafi
Separate the driveshafts from the transaxle by prying with a
bar inserled between the shaft and the case.
Caution
. Do not damage the oil sgal.
Enoine mount member
1. Suspend the enoine wrth a chain block
2. Remove the No.1 and No.2 engine mount nuts.
3. Removethe engine mount member bolts and nuts and the
engine mount member.
Caution
. Be caretul so that the engine does not fall when
removlng the member'
ro, J"o,^. ]F "o , 1"n,",
MOUMI
MOUNT
B-30