Spark Plug; Oil Dipstick; Oil Pressure Switch; Oil Filter - Mazda 121 Workshop Manual

ASSEMBLY
Spa* Plug
1. Apply anitserze compound or molybdenum-based
lubdcant
to the spark Plug threads.
2. lnstall the spark Plugs.
Tiohteninq loroue:
'is-zs'il.m
1t.s-z.s m-rg, 11-17 ftlb)
Oil Dlpstick
Install the oil dipstick.
Oil Pressure Swilch
lnstall the oil Dressure switch.
Tiohteninq torque:
lz-re-tt.m ti.z-r.8 m-kg, 104-156 in-lb)
Oil Filter
1. Remove all toreign material from the oil iilter mounting
surlace.
2. Apply a small amount oi clean engine oilto the rubber seal
of the oil filter.
3. Install the oil filter and tighten it by hand until the rubber
seal contacts the base.
4. Tighten the filter 1 and 1/6 turn with a filter wrench
No.3 Engine Mount Brackel
Install the No.3 engine mount bracket
Tiohteninq totoue:
-ss-t
t3- Hln ig.s-i1.5 m-kg. 69-83 ttlb)
Allernator
1. Install the alternator strap.
Tiahtenino torque:
iz-sz
-t't.m
1s.e-s.o m-t<g, 2?-38 ft'lb)
2. lnstallthe alternator and alternator drive beft Looselytight'
en the alternator installation bolt.
3. Adjust the drive belt deflection. (Refer to page B-5.)
Tightening torque
Alternator inslallation bolt (D :
37-52 N.m (3.8-5.3 m-kg, 27_38 ftnb)
Belt-adiustlng boll @ :
'19-25 N.m (1.9-2.6 m-kg, 14-19 tt-lb)
B-80