Radiator Removal/Installation; Radiator Inspection - Mazda 121 Workshop Manual

RADIATOR
RADIATOR
REMOVAL / INSTALLATION
Caution
. Eetore loosening the radiator drain plug, verlty lhat the radiator d.ain hose tac€s straight down,
. Poallion the hose damp in the original localion on the hose, and squeeze the clamp lightly
with large pliers to ensure a good tit.
1 Disconnecl lhe negatrve battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the figure.
4. lnstall in the reverse oroer ol removal
r*n {3o-1 ro cfrrg, 6F95 hrb)
1. Cooling fan connector
2. Coolant reservoir hose
3. Radialor hose
4. Oil cooler hose (ATX)
5. Radiator bracket
6. Radiator
I n s p e c t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
p a g e E 7
7- Cooling fan and radiator cowling assembly
INSPECTION
Check for the tollowing and repair or replace as necessary.
1. Cracks, damage, and water leakage.
2. Bent lins (repair with a screwdriver).
3. Distoned or bent radiator inlet.
Sleps Atter Installation
1. Fill the radiator with the specified amount and type of en-
gine coolant. (Refer to page E-4.)
2. Connect the negative battery cable.
3. Start the engine and check for leaks.
E-7