Pontiac Fiero 1988 Service Manual page 81

1B-36 ASR CONDITIONING
Install or Connect
1. Compressor assembly.
2. New O-rings at compressor manifold (lubricate
with 525 viscosity refrigerant oil).
3. Compressor hose assembly.
%S
Tighten
Torque the following assemblies as
follows:
® Compressor hose assembly at com-
pressor to 4 N*m (3 lb. ft.).
• Compressor retaining bolts to 50
Nnn (37 lb. ft.).
1 / 1 Adjust
Belt tension to 350 newtons (80 lbs.).
4. Lower vehicle.
5. Negative ( - ) battery cable.
6. Evacuate and charge system.
1 - WATER PUMP
2 - 27 N«m (20 LB.FT.)
3 - STARTER MOTOR
4 - BRACKET
5 - COMPRESSOR ASM.
6 - 50 N-m (37 LB.FT.)
7 - CRANKSHAFT
8 - BRACKET
9 - SPACER
H20025-1B
Figure 37 A C Compressor Mounting — VIN Code R
1- COMPRESSOR ASM
2 - BRACKET
3 - 40-60
N-m
(30-44LB-FT)
4 - 20-34 N-m (15-25LB-FT)
5 - BRACKET ASM
6- BRACKET
7 - TORQUE STRUT BRACKET
8 - ENGINE ASM
9 - BELT
G20019-1B
Figure 38 A/C Compressor Mounting — VIN Code 9