Pontiac Fiero 1988 Service Manual page 173

3 B 4 4 STEERING WHEELS AND COLUMNS
^ \ Tighten
11. Column assembly
• Pinch to 62 N-m (47 lbs.
4. Left I.P. sound insulator
S T E E R I N G C O L U M N
Fig. 8
ft.)
4-4
1.
2.
3.
4.
6.
7.
9.
10.
Remove or Disconnect
Battery ground
Left I.P. sound absorber
Left I.P. trim pad and steering column trim collar
Horn contact pad - only if column will be
disassembled
Steering wheel - only if column will be
disassembled
Steering shaft to intermediate shaft connection
Column bracket support bolts and column
bracket support nut
Shift indicator cable
Electrical connectors
Shift cable at actuator and housing holder
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Install or Connect
Column Assembly
Shift cable and housing
Electrical connectors
Shift indicator cable
Support bolts and nut
Intermediate shaft upper shaft bolt
Tighten
m Shift Indicator. See "Shift Indicator
Adjustment."
• Support bolts to 27 N-m (20 lbs. ft.)
• Pinch bolt to 52 N-m (39 lbs. ft.)
Install or Connect
Steering wheel
Horn contact pad
Steering column and left I.P. trim
I.P. sound insulator
Battery ground
Fig. 7 Steering Column Mounting