Pontiac Fiero 1988 Service Manual page 137

2 C 6 BODY PANEL REPAIR
The parts involved:
• Front and rear bumper assemblies
• Hood
• Right and left front doors*
• Right and left rear doors
• Right and left quarter panel assemblies
• Rear compartment lid/hatch
• Right and left front fenders
Certification label on drivers door qualifies as
a theft prevention label.
S P O T R E P A I R W I T H L A C Q U E R C L E A R C O A T
ADHESION PROMOTER
1 - W E T SAND AREA TO BE PRIMED
AND COLOR COATED WITH 400
GRITOR FINER.
2 - WET SAND AREA TO BE CLEAR
COATED
ONLY,
WITH 600 GRIT
OR FINER.
3 - APPLY ADHESION PROMOTER OVER
AND BEYOND SANDED AREAS.
4 - APPLY BASE COLOR COAT AS PER
LABEL DIRECTION.
5 - APPLY LACQUER CLEAR COAT
BEYOND BASE COLOR COAT BUT
WITHIN ADHESION PROMOTER.
ALLOW TO DRY OVERNIGHT AND
COMPOUND.
G 2 0 0 1 2 - 2 C
Figure 1 Spot Repair With Lacquer Clear Coat