Pontiac Fiero 1988 Service Manual page 322

2.5L
ENGINE
6A1-21
1 - ARBOR PRESS
2 - J-21474-13 0R
J-21795-1
520024-6A4
Inspect
• For proper completion of repair.
Fig. 813 Camshaft Timing Gear/Thrust Plate End
Clearance
44*
Install or Connect
L
high
3.
4.
5.
6.
7.
8.
9.
Camshaft and gear into cylinder block.
• Do not damage bearings on cam.
• Lubricate camshaft journals with
quality engine oil supplement.
Rotate camshaft and crankshaft so that the
timing marks on gear teeth line up. Engine is now
in No. 4 cylinder firing position.
Camshaft thrust plate to block screws - 10 N-m
(90 lb. in.).
Timing gear cover.
Front pulley and hub (line up key). Center bolt
220 N*m (162 lb. ft).
Front engine mount and bracket.
Valve lifters and push rod cover.
Push rods, rocker arms and cover.
Engine/transaxle assembly into vehicle.
MANUAL TRANS
ENGINES
AUTOMATIC TRANS. ENGINES
520036-6A1
Fig. 814 Flywheel Attachment "Manual and Automatic
Transaxle"
S P E C I F I C A T I O N S
BOLT TORQUE
Balancer to Block Bolts
Short Bolts (88mm) 12 N-m (9 lb. ft.) + 75°
Turn
Long Bolts(108mm) 12 N-m (9 lb. ft.) + 90°
Turn
Camshaft Thrust
Plate To Block Bolt 10 N-m (90 lb. in.)
Clamps Radiator Hoses, All 2 N-m (17 lb. in.)
Connecting Rod Nut 44 N-m (32 lb. ft.)
Cylinder Head to Block Bolt (see text)
EFI Assembly to Manifold Bolt 20 N-m (15 lb.
ft.)
EFI Assembly to Manifold Nut 20 N-m (15 lb.
ft.)
EGR Valve to Manifold Bolt 22 N-m (16 lb. ft.)
Exhaust Manifold to Cyl. Head Bolt (see text)
Flywheel To Crankshaft (Automatic)
LUBRICATION OIL CAPACITY
Bolt 75 N-m (55 lb. ft.)
Flywheel to Crankshaft (Manual) Bolt 93 N-m
(69 lb. ft.)
Harmonic Balancer Bolt 220 N-m (162 lb. ft.)
Intake Manifold To Cyl.
Head Bolt (see text)
Main Bearing to Block Bolt 95 N-m (70 lb. ft.)
Plug Oil Pan Drain 34 N-m (25 lb. ft.)
Oil Pan to Block Bolt 27 N-m (20 lb. ft.)
Push Rod Cover To Block Nut 10 N-m (90 lb.
in.)
Rocker Arm Bolt 32 N-m (24 lb. in.)
Rocker Arm Cover Bolt 5 N-m (45 lb. in.)
Stud Roller Lifter Guide Retainer
to Block 10 N-m (90 lb. in.)
Thermostat Housing Bolt 27 N-m (20 lb. ft.)
Timing Gear Cover To Block Bolt .. 10 N-m (90 lb.
in.)
Water Outlet Housing Bolt 27 N-m (20 lb. ft.)
Water Pump To Block Bolt 34 N-m (25 lb. ft.)
Without Filter Change 3.75 Liters (4 Qts.)
With Filter Change 3.75 Liters (4 Qts.)
Filter Type PFI072, or Equivalent