Pontiac Fiero 1988 Service Manual page 365

6B-16 ENGINE COOLING
Figure 29 Electric Fan Mounting
REMOVE PULLEY WITH J25034-B
OR J29785-A
INSTALL PULLEY WITH J25033-B
J10251-6B-P
Figure 30 Removing and Installing Water
Pump Pulley — 2.5L
WATER PUMP —
2.5L
F " * l Remove or Disconnect
Tools Required:
J25034-B Pulley Remover, or
J29785-A Pulley Remover
J25033-B Pulley Installer
1. Negative battery cable.
2. Cooling system.
3. Serpentine drive belt.
4. Water pump front cover assembly attaching
bolts.
5. Water pump front cover assembly.
Disassemble
• Pulley from old water pump front cover
assembly using J25034-B or J29785-A.
Clean
Water pump mating surfaces.
Assemble
• Pulley to new water pump front cover
assembly using J25033-B.
Figure 31 Water Pump Front Cover
Assembly Mounting — 2.5L