Sun Microsystems Sun Enterprise 10000 Dynamic Reconfiguration User Manual page 93

Auto-Configuration Error Messages
The following table contains the list of auto-configuration error messages that are
sent to the system logs and/or to the SSP applications.
TABLE A-9
Error Message
DR Error: Complete pending
DR operation prior to
running autoconfig . . .
Invalid argument
DR Error: Could not get /
tmp/AdDrEm.lck lock . . .
errno_description
DR Error: Could not unlock
/tmp/AdDrEm.lck lock . . .
errno_description
DR Error: devlinks cmd
failed. . . error descriptions
DR Error: disks cmd failed
. . . error descriptions
Auto-Configuration Error Messages
Probable Cause
The autoconfig(1M) command failed
because a DR operation was still
pending (that is, the board was not
fully detached or attached before you
issued the autoconfig(1M)
command to reconfigure the operating
environment).
The DR daemon failed to get the lock
it needs so that it can reconfigure the
operating environment.
The DR daemon could not release the
lock.
The devlinks(1M) command failed to
reconfigure the operating
environment.
The disks(1M) command failed to
reconfigure the operating
environment.
Suggested Action
Use the
dr_cmd_board_states(1M)
command to determine the
state of the board. Decide to
abort or complete the pending
operation before you try to use
the autoconfig(1M)
command to reconfigure the
operating environment.
Check the additional
errno_description and/or error
number that is sent with the
error message to determine
why the lock could not be
acquired.
Check the additional
errno_description and/or error
number that is sent with the
error message to determine
why the lock was not released.
Check the additional error
descriptions and/or error
number that is sent with the
error message to determine
why the command failed.
Manually run the command on
the domain.
Check the additional error
descriptions and/or error
number that is sent with the
error message to determine
why the command failed.
Manually run the command on
the domain.
Appendix 77