Sun Microsystems Sun Enterprise 10000 Dynamic Reconfiguration User Manual page 41

If you wish to complete the board attach operation, use the
complete_attach(1M) command.
dr> complete_attach 6
Completing attach for board 6.
...Checking IDN state of domain_name_a : UP
Issuing IDN UNLINK (domain_name_a)
Verifying IDN UNLINK...
IDN (XM) UNLINK succeeded (domain_name)
...Checking IDN state of domain_name_a : UP
...Checking IDN state of domain_name_b : UP
Initiating IDN LINK...
IDN LINK succeeded (domain_name_a + domain_name_b)
Board attachment completed successfully.
dr>
After you successfully attach the board, all of the drshow(1M) displays become
available.
5. Use the drshow(1M) to display the I/O information for the newly attached board.
dr> drshow 6 IO
SBus Controllers and Devices for Board 6
---------------------- Sbus 0 : Slot 0 : SUNW,pln0 -------------
device opens
------ -----
ssd0 0
ssd16 0
ssd32 0
ssd48 0
ssd64 0
ssd80 0
---------------------- Sbus 0 : Slot 1 : SUNW,pln2 -------------
device opens
------ -----
ssd96 0
ssd97 0
...
name
----
/dev/dsk/c1t0d0s0
/dev/dsk/c1t1d0s0
/dev/dsk/c1t2d0s0
/dev/dsk/c1t3d0s0
/dev/dsk/c1t4d0s0
/dev/dsk/c1t5d0s0
name
----
/dev/dsk/c2t0d0s0
/dev/dsk/c2t0d1s0
usage
-----
usage
-----
Chapter 25