Sun Microsystems Sun Enterprise 10000 Dynamic Reconfiguration User Manual page 65

A
A P P E N D I X
DR Error Messages
This appendix contains a list of some of the error messages that you might see while
you are performing DR operations. The list does not include Protocol Independent
Module (PIM) layer errors, which are more generic than the error messages in the
following tables.
All DR error messages are sent to the one or both of the following locations:
SSP applications
System error logs
Searching This Appendix
Before you use this appendix, take time to read the following list of search tips so
that you can find a specific message.
Search on a specific string of text in the error message.
Avoid using numeric values. They are treated as replaceable text in this appendix.
Avoid using text that is replaceable. In this appendix, the following names are
used to represent replaceable text in the error messages: descriptive message,
errno_description. device_name, target_path, mount_point, interface_name_instance,
interface_name, and partition_name.
If you are reading this text in hard-copy form, the tables are presented in order by
the type of error or failure. The contents of the tables is sorted alphabetically in
decending order.
Error-Type Links
Use one of the following links to start your search.
49