Sun Microsystems Sun Enterprise 10000 Dynamic Reconfiguration User Manual page 114

AP-Related Error Messages
The following table contains the list of Alternate Pathing error message that are sent
to the system logs and/or to the SSP applications.
TABLE A-13
Error Message
add_net_ap_info: multiple
AP aliases ignored
AP daemon call failed:
error_message *OR* error =
error_number
AP daemon comm init failed:
error_message *OR* error =
error_number
AP daemon query failed:
error_message *OR* error =
error_number
AP daemon query failed:
length mismatch
98 Sun Enterprise 10000 Dynamic Reconfiguration User Guide • February 2000
AP-Related Error Messages
Probable Cause
An AP device has multiple AP aliases.
Only one alias is used. The other
aliases were ignored. This is not an
error.
An attempt to notify and/or query the
AP librarian failed.
The DR daemon encountered a failure
when it tried to establish a channel of
communication with the AP librarian.
A descriptive error message may be
available to provide specific details
about this failure, or an error number
may be available.
The DR daemon could not successfully
query the AP librarian on the usage of
a specific I/O controller. A descriptive
error message may be available to
provide specific details about this
failure, or an error number may be
available.
The DR daemon queried the AP
librarian about the usage of a specific
I/O controller, but the response was
incorrect.
Suggested Action
If this error persists, remove
all but one of the AP aliases.
A descriptive error message
may be available to provide
specific details about this
failure, or an error number
may be available. Also, check
the ap_daemon(1M) man
page for more details about
this error.
A descriptive error message
may be available to provide
specific details about this
failure, or an error number
may be available. Also, check
the ap_daemon(1M) man
page for more details about
this error.
A descriptive error message
may be available to provide
specific details about this
failure, or an error number
may be available. Also, check
the ap_daemon(1M) man
page for more details about
this error.
A descriptive error message
may be available to provide
specific details about this
failure, or an error number
may be available. Also, check
the ap_daemon(1M) man
page for more details about
this error.