Download
Share
Print this page
Sun Microsystems Enterprise 10000 Upgrade Instructions
  1. Manuals
  2. Brands
  3. Sun Microsystems Manuals
  4. PCI Card
  5. Sun Enterprise 10000
  6. Upgrade instructions
Sun Microsystems Enterprise 10000 Upgrade Instructions

Sun Microsystems Enterprise 10000 Upgrade Instructions

Hide thumbs Also See for Enterprise 10000:

Advertisement

Quick Links

Download this manual
Sun™ Enterprise 10000™
PCI Upgrade Instructions
ForUsewithSolaris2.6HW:3/98orLaterand
SSPVersion3.1orLater
Sun Microsystems Computer Company
A Sun Microsystems, Inc. Business
901 San Antonio Road
Palo Alto, CA 94303-4900 USA
650 960-1300
fax 650 969-9131
Part No.: 805-3831-11
Revision A, July 1998
Send comments about this document to:
smcc-docs@sun.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Enterprise 10000 and is the answer not in the manual?

Questions and answers

Related Manuals for Sun Microsystems Enterprise 10000

Summary of Contents for Sun Microsystems Enterprise 10000

  • Page 1 Sun™ Enterprise 10000™ PCI Upgrade Instructions ForUsewithSolaris2.6HW:3/98orLaterand SSPVersion3.1orLater Sun Microsystems Computer Company A Sun Microsystems, Inc. Business 901 San Antonio Road Palo Alto, CA 94303-4900 USA 650 960-1300 fax 650 969-9131 Part No.: 805-3831-11 Revision A, July 1998 Send comments about this document to:...
  • Page 2 Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd. Sun, Sun Microsystems, le logo Sun, AnswerBook, SunDocs, et Solaris sont des marques de fabrique ou des marques déposées, ou marques de service, de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays. Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.
  • Page 3 The Dynamic Reconfiguration User's Guide tells how to do so with the DR Detach feature. This document contains the following sections to assist you with installing PCI components on your Enterprise 10000 system. Refer to on page 2 for FIGURE 1...
  • Page 4 Powering on a system board System board Personality plate PCI filler PCI card panel PCI front bracket PCI front PCI I/O cover module Top PCI riser card Bottom PCI riser card PCI Components FIGURE 1 Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...

  • Page 5: Removing A System Board

    Caution – If the yellow LEDs are lit, do not remove the component. See “Powering Off a System Board” on page 3.” 5. Attach a wrist strap. 6. Unscrew the Phillips screws from the system board cover and remove the cover. Installing PCI Components into the Enterprise 10000 System...
  • Page 6 3. Place the SBus card in an antistatic bag. SBUS 0 SLOT 0 SBUS 0 SLOT 1 SBUS 1 SLOT 0 SBUS 1 SLOT 1 Personality plate with EMI gasket SBus Card Removal FIGURE 2 Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...
  • Page 7 2. Unscrew the six 3/32-inch hex-head screws located on the compression connectors. 3. Remove the SBus I/O module ( on page 5). FIGURE 3 After removal, place the Sbus I/O module into an anti-static bag. SBus I/O Module Removal FIGURE 3 Installing PCI Components into the Enterprise 10000 System...
  • Page 8 Compress personality plate and face plate in this direction while installing or removing attachment screws Remove/install attachment screws here Personality Plate Removal FIGURE 4 Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...
  • Page 9 Personality Plate Removal (Top View) FIGURE 5 Installing a PCI Personality Plate 1. Confirm that the type of personality plate that you are installing is correct for your application ( on page 8). FIGURE 6 Installing PCI Components into the Enterprise 10000 System...
  • Page 10 FIGURE 7 Do not place the personality plate between the EMI gasket and face plate. EMI gasket Personality Plate Angled flange(s) Front stiffener with notch Personality Plate Installation (Top View) FIGURE 7 Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...
  • Page 11 9. FIGURE 8 Compress personality plate and face plate in this direction while installing or removing attachment screws Remove/install attachment screws here Personality Plate Installation FIGURE 8 Installing PCI Components into the Enterprise 10000 System...
  • Page 12 PCI I/O cover module Top PCI riser card Bottom PCI riser card PCI Components FIGURE 9 Installing a PCI Front Bracket 4. Install the PCI front brackets as shown in FIGURE 10 Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...
  • Page 13 5. If the PCI card is not immediately replaced, install a filler panel (part number 240-2391-01) onto the PCI front bracket using the PCI retention screw ( FIGURE 11 page 11). PCI front bracket PCI retention screw PCI filler panel PCI Filler Panel Installation FIGURE 11 Installing PCI Components into the Enterprise 10000 System...

  • Page 14: Installing A Pci Riser Card

    FIGURE 12 Top PCI riser card Bottom PCI riser card Countersink screw Fastening hardware (bottom riser card only) Cone washer Fastening hardware for bottom riser only PCI Riser Card Components FIGURE 12 Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...
  • Page 15 4. Engage all captive connector screws clockwise using a 3/32-in. hex-head driver. 5. Tighten the captive connector screws to a low torque of 0.34 Nm (3.0 inch pounds) in the pattern noted in on page 14. FIGURE 14 Installing PCI Components into the Enterprise 10000 System...
  • Page 16 8. Tighten discrete attachment hardware to a torque setting of 0.7 - 0.8 Nm (6.0 - 7.0 inch pounds). 9. Install PCI cards, if necessary. See “Installing a PCI Card” on page 15.” Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...

  • Page 17: Installing A Pci Card

    If not, obtain and install the correct riser card. 5. Guide the PCI card from behind the system board face plate, through the opening, and place the PCI card edge into the mating connector. Installing PCI Components into the Enterprise 10000 System...
  • Page 18 FIGURE 18 PCI front cover PCI Front Cover Installation FIGURE 18 9. Replace the system board cover and secure with screws tightening to a torque setting of 0.8 Nm (7.0 inch pounds). Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...

  • Page 19: Installing A System Board

    4. Apply firm pressure to the face plate to engage the board with the centerplane connector. 5. Use the insertion handles to fully seat the board. 6. Lock the handles by sliding the locking levers into position until they are fully nested with the handles. Installing PCI Components into the Enterprise 10000 System...
  • Page 20 1. If two supplies are failing, no AC module may be removed unless the two failed supplies are under the same AC module control. 2. Turn on a system board by using hostview(1M) or by typing: ssp# power -on -sb x Where x = 0-15. Refer to power(1M) for more information. Sun Enterprise 10000 PCI Upgrade Instructions • July 1998...