Figure 3-7 Dr Properties Window; To View Dr Cpu Configuration Information - Sun Microsystems Sun Enterprise 10000 Dynamic Reconfiguration User Manual

Auto Update System Information Displays:
Update Interval (secs)
30
save
DR Properties Window
FIGURE 3-7
2. To cause displays to be updated, set Auto Update Domain Information Displays to
On (the default).
3. Set the Update Interval to a value (in seconds) to determine how often updates
occur.
If you set Auto Update Domain Information Displays to Off, the displays are not
updated; each display is a snapshot taken at the time the button was pressed.
4. Click the Save button to save the settings between Hostview invocations.
Note – When the update interval is set to a low value, such as 10 seconds, and
several information windows are displayed, responsiveness of the DR windows may
be degraded. This is especially true when device detail windows are displayed. Each
time an information window is updated, an RPC is issued to the dr_daemon(1M)
running on the domain. The dr_daemon is an iterative RPC server, so each RPC
request is run sequentially.

To View DR CPU Configuration Information

Click the cpu button.
The DR CPU Configuration window is displayed (
DR Unsafe Devices
reset dismiss
On
help
).
FIGURE 3-8
Chapter
Off
39