Sun Microsystems Sun Enterprise 10000 Dynamic Reconfiguration User Manual page 78

TABLE A-4
Error Message
14 SFDR_ERR_BUSY
15 SFDR_ERR_NODEV
16 SFDR_ERR_INVAL
17 SFDR_ERR_STATE
18 SFDR_ERR_PROBE
19 SFDR_ERR_DEPROBE
20 SFDR_ERR_HW_INTERCONNECT
21 SFDR_ERR_OFFLINE
22 SFDR_ERR_ONLINE
23 SFDR_ERR_CPUSTART
24 SFDR_ERR_CPUSTOP
25 SFDR_ERR_JUGGLE_
BOOTPROC
26 SFDR_ERR_CANCEL
62 Sun Enterprise 10000 Dynamic Reconfiguration User Guide • February 2000
PSM Error Messages (Continued)
Probable Cause
The device is busy.
No devices are present.
Invalid argument and/or operation
Invalid board state (transition)
Failed to probe OBP nodes for a board.
Failed to deprobe OBP nodes for a
board.
Interconnect hardware failed.
Failed to place a CPU offline.
Failed to bring a CPU online.
Failed to start a CPU.
Failed to stop a CPU.
Failed to move the clock-signal CPU.
Could not cancel a RELEASE
operation.
Suggested Action
Check the I/O usage of the
device to determine the cause
of this error (for example, a
mounted file system or the
last path to an AP device). If
possible, manually adjust the
system to correct this error
(for instance, unmount the
file system). If the cause of
the error is not apparent,
contact your Sun service
provider.
None
None
None
None
None
None
None
None
None
None
None
Retry the Abort Detach
operation after the Drain
operation is complete.