To View Dr Obp Configuration Information - Sun Microsystems Sun Enterprise 10000 Dynamic Reconfiguration User Manual

To View DR OBP Configuration Information

Note – The information in the DR OBP Configuration window is derived from the
OBP device tree, and is less detailed than the information that is available from the
other windows described in this section. For example, in the init attach state, only
the I/O adapters are known—not the devices attached to those controllers nor the
memory interleave configuration. This window is usually used when a board is in
the init attach state.
Click the obp button.
The DR OBP Configuration window is displayed ( ).
FIGURE 3-12
Chapter 45