17.1.5 Time Service
[Programming Example: DIL Table]
The DIL Table can be programmed to direct calls to a different destination for each time mode based on
the CO line receiving the call. Calls can, for example, be directed to an ICD group during the day mode,
or to the Voice Mail (VM) service of a VPS during the lunch and night modes.
(CO Line No.)
A call is received at 20:00 on CO line 01.
The call will be handled by Time Table 1.
The current time mode is "night" (shown in "Programming Example: Time Table", above).
The call is directed to extension 150, which is a floating extension number used by the VPS
(programming not shown here).
The PBX can also accommodate 24 different holidays. The start and end date of each holiday can be
programmed, and all holidays are assigned a single time mode. For example, if the "night" mode is assigned
as the time mode for holidays, and a holiday begins December 31st and ends January 1st, all PBX features
will use their "night" settings from 0:00 A.M. on December 31st until 0:00 A.M. on January 1st.
Time Service Button
A flexible button can be customized as one of the following Time Service buttons:
These buttons can be used to switch the current time mode: pressing the Day/Night button will toggle
between the day and night modes, for example.
Each Time Service button will display the current time mode using a different light pattern or color, as
Slow green flashing
Slow red flashing
Pressing a Time Service button will change the current time mode only if the COS assigned to the
extension is authorized to do so or if the extension is assigned as a manager. All other extension users
can press this button on their proprietary telephones (PTs) to display the current time mode.
Current Time Mode
Document Version 2010-11