Download  Print this page

Advertisement

19.1.5 Voice Mail DTMF Integration
5.21 [3-8-1] VM(DTMF) Group—System Settings
VM DTMF Command—Recording Message
VM DTMF Command—Listening Message
VM DTMF Command—Switching to AA
VM DTMF Command—Switching to VM
Switching to VM
Switching to AA
Recording message
Listening message
Note
H = Mailbox Number
3.
VM Service
a.
FWD to a Mailbox of the VPS
The PBX sends a mailbox number of the corresponding extension to the VPS when a call is forwarded
from an extension to the VPS. Therefore the caller can leave a message for the called extension without
knowing the mailbox number.
[FWD to the VPS Sequence Selection]
If an extension user sets FWD to the VPS, any incoming call will be forwarded to the VPS.
It is also possible to send the AA command, even in the VM service mode, when calls are forwarded
so that the caller can be directed to an extension rather than a mailbox. This can be performed by
selecting "AA" through system programming.
5.21 [3-8-1] VM(DTMF) Group—System Settings—
Parameter
Answer by Mailbox
(Default)
AA
None
b.
Intercept Routing to a Mailbox of the VPS
The PBX sends a mailbox number of the corresponding extension to the VPS when a CO line call is
intercepted from an extension to the VPS. Therefore the caller can leave a message for the called
extension without knowing the mailbox number.
[Intercept Routing to the VPS Sequence Selection]
If an extension user sets Intercept Routing to the VPS, the intercepted CO line calls will be redirected
to the VPS.
It is also possible to send the AA command, even in the VM service mode, when calls are intercepted
so that the caller can be directed to an extension rather than a mailbox. This can be performed by
selecting "AA" through system programming.
5.21 [3-8-1] VM(DTMF) Group—System Settings—
342
Feature Manual
Transmitted Command
In AA Service Mode
Switching to VM command +
Recording message command
(#6 + H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
Others—Intercept Routing to the VPS Sequence
Command (Default)
#6
#8
H
H
Others—FWD to the VPS Sequence
In VM Service Mode
Recording message command
(H [H = Mailbox No.])
Switching to AA command (#8)
Document Version 2010-11

Advertisement

Table of Contents

   Related Manuals for Panasonic KX-TDA50

This manual is also suitable for:

Kx-tda600Kx-tda100Kx-tda200

Comments to this Manuals

Symbols: 0
Latest comments: