Download  Print this page

Advertisement

When the original destination is:
PS Ring Group
*2
External Pager (TAFAS)
Analog/ISDN Remote Maintenance
Other PBX Extension (TIE with no PBX Code)
*1
Intercept Routing for DISA will redirect a call only if all of the Direct Inward System Access (DISA) ports are busy. If Intercept Routing
is activated after a call from DISA reaches the destination extension, the Intercept Routing settings assigned to that extension will
be applied.
*2
By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and assigning Intercept Routing destinations
to the Virtual PS, calls to these destinations will be redirected to the Intercept Routing destination of the Virtual PS.
Programming Example
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
<Intercept Destination of Virtual PS>
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming CO line call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
[Available Intercept Destination]
Wired Extension (PT/SLT/T1-OPX)
PS
ICD Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Document Version 2010-11
*2
FWD Destination
2001
600
...
...
Intercept Destination
Day
Lunch Break
2001
1001
1001
...
...
...
Intercept Destination
The Available Intercept Destination is:
Not assignable (Intercept Routing is not available.)
"600" is an example of a
Floating Extension No.
for the External Pager
...
Night
...
1001
1001
...
...
...
9.1.11 Intercept Routing
Availability
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Feature Manual
167

Advertisement

Table of Contents

   Related Manuals for Panasonic KX-TDA50

This manual is also suitable for:

Kx-tda600Kx-tda100Kx-tda200

Comments to this Manuals

Symbols: 0
Latest comments: